PRS-HG-TRAP
Trapeze hanger kit
Cross member, rod, and fasteners for a tray or conduit trapeze.
Quote by width, rod diameter, and drop length. Include the count of supports.
Request quote — lowest pricing
Data center products · quote only · separate from land submissions
Have land instead? Submit a siteQuote lines
Cable hangers for data center builds
Hangers set the elevation of tray and conduit. On US data center jobs the ceiling is rarely one thing: steel, metal deck, and concrete each take a different anchor. Spacing and what the support carries, a full tray or a few cables, decide the bill of materials.
Quote this category
How hangers are used to support data center pathways
Hangers set the elevation of tray and conduit and keep low-voltage bundles off the deck until a tray exists. A trapeze — strut plus two rods — carries ladder tray and banks of conduit. A J-hook carries a fiber or controls bundle that is not ready for tray. Threaded rod is the drop from structure to that support.
The anchor depends on the ceiling. Steel flanges take clamps. Metal deck and concrete take different fasteners. Data hall overhead is crowded with busway, tray, and lights, so spacing is a coordination problem as much as a parts problem. Quote the count of supports, the drop length, and the rod diameter the drawing uses.
The thing being carried should be on the same request when you still can. Cable tray width drives trapeze width. Fiber that is only J-hooked today may move into tray later. Channel nuts and beam clamps are the pieces that close the connection. The quote is materials. It is not a rigging plan.
Trapeze versus J-hook
A trapeze of strut and rod carries ladder tray and banks of conduit. A J-hook carries a low-voltage or fiber bundle that is not in tray yet. Mixing them up under-builds the tray run or over-builds a simple drop. Quote cable tray alongside the trapeze when both are still open.
Rod, drop length, and the structure
Rod diameter and drop length come from the distance between structure and tray. Couplings matter when a drop is spliced. Tell us whether you are clamping steel, shooting into deck, or anchoring concrete. The hardware for that connection can ride on the same quote.
Representative quote lines
PRS-HG-HOOK
J-hook
Individual hooks for low-voltage and fiber bundles that are not in tray yet.
Quote by bundle diameter and fastener style for the structure you are attaching to.
Request quote — lowest pricing
PRS-HG-ROD
Threaded rod and couplings
Rod, couplings, and washers for drops from structure to trapeze.
Quote by diameter, length, and plain or plated. Couplings if drops are spliced.
Request quote — lowest pricing
Codes keep a quote attached to the right line in this catalog. They are not a manufacturer part number. If you have a spec, put it in the notes. We price that request, not a shopping cart.
Frequently asked questions
Trapeze or J-hook for data center cable?
Trapeze for tray and for conduit banks. J-hook for a limited low-voltage or fiber bundle that is not in tray. Using hooks under a heavy ladder tray under-builds the support. Using trapezes for a few cords over-builds it. Quote the pathway you are actually hanging.
What rod size should I send?
The diameter and the drop length from structure to tray, and how many drops. Couplings matter if a long drop is spliced. If the drawing is not finished, say the tray width and the structure type. Do not leave rod size blank and expect a single price.
How do hangers attach to the building?
Beam clamps on steel, and anchors suited to deck or concrete when that is the structure. Those anchors are part of the quote only if you name them. A trapeze kit without an anchor still has to be fastened by the crew. We are not specifying the structural connection.
How many supports do I need?
That spacing is on the pathway drawing, based on tray load and type. This catalog does not publish a universal spacing. Send the count, or the tray footage plus the spacing the engineer used, and the quote can follow it.
Can hangers be quoted before the tray width is final?
You can ask for a budgetary range, and the notes should say the width is open. A firm price wants the tray width, because the cross member changes. Revise the quote when the pathway locks. We would rather re-quote than ship the wrong length of strut.
Are hanger lead times tied to the tray?
Often they are bought together, but rod and common channel are not always on the same clock as a special tray fitting. The quote separates them when the timing differs. Nothing here is a stock promise.